GO
SEARCH:

Washer Leaking Water

The part(s) or condition(s) listed below for the symptom Washer leaking water are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Related Videos

    Most Frequent Causes for Washer leaking water

    For the most accurate results, enter your model number.


    Cause 1Drain Pump

    The drain pump pumps water out the drain hose. If the drain pump is cracked or damaged, or if the bearings are worn out, the drain pump may leak water. The drain pump is not repairable—if the pump is leaking water, replace it.

    Parts
    Cause 2Tub Seal and Bearing Kit

    The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.

    Parts
    Cause 3Tub Seal

    The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.

    Parts
    Cause 4Door Boot Seal

    The door boot seal might be torn, causing water to leak from the seal. If the boot seal is torn, replace it.

    Parts
    Cause 5Tub-to-Pump Hose

    The tub-to-pump-hose might be split or torn. If the tub-to-pump-hose is damaged, replace it. Do not attempt to cut off the damaged piece of hose and stretch the hose to fit the pump. Stretching the hose will put strain on the remainder of the hose and may cause the hose to suddenly rupture.

    Parts
    Cause 6Drain Hose

    The drain hose may be leaking. The drain hose most commonly leaks from the connection between the pump and the back of the washer. If the washer is pushed too far against the wall, the hose can rub against the wall and form a leak. Inspect the drain hose for leaks. If the drain hose is leaking, replace it.

    Parts