- 1-844-200-5464
- My Orders
- Cart 0 item(s)
Refine Selection Here:
Item # 1195967
Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.
OEM Part - Manufacturer #285753A
Item # 4337602
Dryer idler pulley assembly.
OEM Part - Manufacturer #W10837240
Item # 2003273
Washing machine drain pump. If the washer does not drain then the drain pump may be clogged, damaged, or defective.
OEM Part - Manufacturer #4681EA2001T
Item # 3109
Washing machine agitator directional cogs. These parts are also referred to as "dog ears." 4 per package. If the upper section of the agitator isn't turning properly, then these cogs are likely worn and will require replacement.
OEM Part - Manufacturer #80040
Item # 2744
Washing machine agitator repair kit with a medium length cam (there are other kits available for different models). This kit should be used when the top part of the agitator is not moving properly but the bottom part is.
OEM Part - Manufacturer #285811
Item # 671098
Washing machine suspension spring. If the suspension spring is broken, the washer will be off balance.
OEM Part - Manufacturer #WP63907
Item # 2670
Washing machine clutch assembly with hardware. *Blue spring for large capacity washers, black for compacts. A worn clutch often causes a slower spin speed which leaves the clothes soaked after the cycle.
OEM Part - Manufacturer #285785
Item # 2754401
Dryer tri-ring retainer for drum support rollers.
OEM Part - Manufacturer #WPW10512946
Item # 3296
Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.
OEM Part - Manufacturer #WP3363394
Item # 4248251
Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.
OEM Part - Manufacturer #3949247V
Item # 1938554
Tub centering spring
OEM Part - Manufacturer #W10400895
Item # 868761
Washing machine water inlet valve kit with bracket. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disassembled and cleaned, only replaced.
OEM Part - Manufacturer #285805
Item # 4185114
Washing machine tub suspension rod kit,. Set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake.
OEM Part - Manufacturer #W10780048
